设为首页 收藏本站 IC币充值
论坛账号至少一个月登录一次,否则会被自动冻结!论坛全站广告位出租2160元一年,有需要联系QQ:3173974412。国内首家由论坛网友持股的IC技术论坛,IC人的乌托邦!
搜索
专业IC版图外包服务 手机号:13816911948 微信同号
广告位:SY02 广告业务联系QQ:3173974412
青软晶尊微电子---IC版图外包服务(13964228177)+教育培训(13573273505)
苏州拓光微电子---芯片设计整体解决方案供应商
以色列芯片设计公司提供超高ADC、DAC接口类定制IP,郑生18988685390(微信)
查看: 412|回复: 0

[供应] ETA9697展嵘供应适应市场瑞昱、CSR、洛达高端耳机充电盒低功耗1UA常输出5V耐压20V方案

[复制链接]
发表于 2019-4-2 23:39:33 | 显示全部楼层 |阅读模式
深圳市展嵘电子有限公司
有需要的上帝可联系小陈:136-6225-3950  :  3412-1522-98
   ETA9697 is an ultra low power PMU with 2 channels: a 16/ single cell Libattery linear charger and a 5V Boost synchronous converter with trueshutoff function. The linear charger fully integrated constant Current((O)/Istant voltage(CV)control module and charge FE, With minimalextemal devices. It also has pre-charge funct on for trickle charging deeplydischarged battery and its fast charge current can be programmed by anexternal resistor. When (V Charge stage is entered, charge will beterminated once the charge current drops to 1/10 of the programmed valueA"STAT"pin is also available to indicate the charge status. And the lowpower 5V Boost converters apable of delivering 0.4A current at 5V output.It can be shut down by puling ENBST low, it disconnect the output fromthe BAI to further decrease the system standby power. Its 1. 4MHZswitching frequenc enable a very small external inductor with inductanceas low as 2.2UH The ETA9697, asa whole, is an ideal for the system solutionthat requires very low standby power and compact PCB board size
[size=0.83em]
FEATURESe Ultra low When standby, Ibat<SUA16vinput standoff voltagee 4 2V Charge termination voltageCharge current programmable, up to 1. 2AOutput Disconnect and SCP at 5voutput&#12539;5V0.4 Output PowerUp to 94% Efficiency for Boost converterFunctioning with NO BATTERYLogic Control Shutdown and Thermal shutdownESOP8 PackageAPPLICATIONSTWS BT earbuds charge caseBluetooth applicationBattery powered LOT module◆ Power Bank
   TWS 耳机充电盒里面的电源pcba主要有两大用途,既要负责充电盒内部电池充电,还需要负责充电盒内部电池升压输出为耳机充电。此外还肩负安全防护,防止内置锂电池过充、过放、短路、过流等保护功能。首先,控制外部电源给TWS耳机电池盒充电,将外部充电器电量充入锂离子电池。这里的外部充电器主要为5V的充电器,如常见的手机适配器,接口为MicroUSB或USB-C,然后降压转化为锂离子电池所需的4.2V电压进行充电,此外还有4.3V或4.35V多个规格。充电芯片有分为线性和开关两种,其中开关充电效率高、发热低,是目前主流的充电方式。
其次,TWS耳机电池盒电源PCBA还需要对外给TWS蓝牙耳机供电,这时又会将锂离子电池升压为5V,然后输出给耳机,耳机通过内部的充电电路完成对内置电池的充电。如此一来,当TWS耳机需要用电的时候,就可以放回充电盒自动补充电量。
充电盒升压芯片也分为同步和非同步两种,其中同步架构的效率高、发热低,非同步整流效率低一些,和移动电源的道理是一样的



您需要登录后才可以回帖 登录 | 入住IC小镇

本版积分规则

关闭

站长推荐上一条 /1 下一条

QQ|Archiver|手机版|IC设计小镇 ( 苏ICP备10008526号  

GMT+8, 2019-11-14 00:51 , Processed in 0.050127 second(s), 8 queries , File On.

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表